KHD
TKMAX: 62000 Nm
These couplings are for use in application with high dynamic loads. Damping of peak torques and vibrations as well as electrical insulation between motor and gearbox are further reasons for the use of this coupling type. The standard material of the elastic intermediate ring Polyurethane (Vulkollan) is suitable for a temperature range of -35°C up to +80°C. For a short time -40°C up to +100°C.
- "Steel coupling, torsionally elastic and bullet-proof (fail safe)
- Torque transmission via elastic buffers
- Buffer elements can be radially replaced by pushing back the retaining ring without moving any equipment
- Arrangement of the brake drum on the gear side to allow the brake torque to be maintained when the motor is disengaged
- Elastic buffers provide superb electrical insulating characteristics (e.g. prevents leaking currents)"
- Coupling hubs finish bored and keywayed
- acc. to DIN 6885
- Coupling hubs unbored
- Coupling hubs pilot bored
- Coupling dynamically balanced according to
- ISO 21940 Grade: G 2.5; G 6.3
- Coupling hubs in special lengths
- Coupling hubs in special material
- Test certificate DIN EN 10204-3.1
Additional PRODUCTS
- All
- Caliper / Disc Brakes
- Components & Accessories
- Couplings
- Drum & Band Brakes
- Hydraulic Systems
- Locking Devices
- Monitoring & Control Systems
- Motor Mounted Brakes
- Pneumatic Drum Clutches & Brakes
- Stop Turn Lock Systems
- Storm Brakes (Rail & Wheel Brakes)
- Thruster / BUEL®
- Wind Turbine Components
- WPT Disc Clutches & Brakes
Gas-hydraulic buffers are installed as impact energy absorber on crane gantries, trolleys, elevators, stackers, reclaimers and other industrial equipment.
Protective element to be connected parallel to the output of the rectifiers BGL, EGL and SGL to increase the interurruption capacity
Din rail mounted unit switches from bridge rectification to half-wave rectification
WPT Low Inertia Brakes are suited for high cycle applications or general brake duties. These heavy duty brakes afford increased precision for your processes with minimal part movement during start and stop, acceleration time is decreased leading to more cycles per minute.
WPT Low Inertia Clutches and Brakes are suited for high cycle applications or general clutch/brake duties.
WPT Low Inertia High Torque Clutches are suited for high cycle applications or general clutch duties.
This flywheel PTO is designed for inline and sideload applications on all internal combustion engines with standard SAE industrial flywheel or flywheel housing dimensions.
WPT Power has engineered the WPT Pilotless™ Mechanical Power Take-off to eliminates the pilot bearing and increases side load capacity over previous generations of PTO products.
WPT Planetary Hydraulic Hoists are ideal for applications in the oil & gas, utility, and crane industries. WPT’s hoist designs adhere to SAE J706 standards and provide lifting capacities of 8,000 lbf and 12,000 lbf, respectively.
WPT Planetary Hydraulic Winches provide fast line speed and consistent, powerful pull capacity.
WPT® Power Grip clutches are designed to accommodate in-line and shaft-to-shaft power transmission applications with large inertia loads.
The WPT® Power Grip PO Clutch is suitable for in-line and shaft-to-shaft power transmission applications.
The WPT® Type 2 Hydraulic Power Take-Off utilizes large spherical roller bearings designed for heavier duty sideload capacity.
WPT® water cooled brakes (WCBs) are high energy absorbing solutions used as dynamic tensioning and static holding brakes.
WPT Worm Gear Winches are offered from 9,000 lbf to 20,000 lbf, with options of hydraulic or electric operation.